Titan Controls

Titan Controls® Eos® Complete Digital Humidity Controller 

The Eos® Complete Digital Humidity Controller allows you to accurately and efficiently control the humidity levels in your garden. Set your desired humidity level and the controller will activate and deactivate humidifying and dehumidifying equipment appropriately. This controller also features low temperature protection in the event that achieving the desired humidity level results in an undesirable temperature. This Eos® unit features a 15 ft remote sensor that monitors your temperature and humidity levels. The easy-to-use analog style interface makes programming the controller a simple task. Day and night settings allow for accurate environmental control.

Titan Controls® Eos® 2 - Digital Humidity Controller 

The Eos® 2 Digital Humidity Controller makes dialing in your room's environment a breeze. It can be used to activate a device to increase humidity in your room or decrease the humidity in your room. The Eos® 2 utilizes a high-quality humidity sensor as well as a photocell for day and night control. Settings are easily programmed with the knob that doubles as a button to change settings. A slide switch controls whether the controller is running in Day, Night or 24 hr mode. 10 Amps/ 120 V/ 60 Hz.

Titan Controls® Zephyr™ 1 - Day/Night Temperature Controller 

Temperature control range is 55°F to 95°F. Controls cooling or heating equipment. Day and night settings keep temperature within 4°F of set point. 6 ft temperature probe is accurate to within 2°F. Enclosure protects internal components from dust, rust and moisture. ETL listed for commercial applications. 15 Amps/ 120 V/ 60 Hz.

Titan Controls® Zephyr™ 2 - High Temperature Shut-Off with Delay 

Controller turns off your lights if high temperature exceeds set point. Built-in 1—30 min hot start delay with HOLD feature. 6 ft temperature probe is accurate to within 2°F. Protects your garden and your plants. Enclosure resists dust, rust and moisture. 15 Amps maximum/ 120 V/ 60 Hz.

Titan Controls® Atlas® 1 - CO2 Monitor/Controller with Remote Sensor 

Atlas® 1 CO2 Monitor/Controller comes with a 25 ft remote sensor. It features adjustable set point and elevation levels, a built-in self calibration function and an integrated photocell that enables operation in daytime hours only, when the plants need CO2. Simple to use and easy to operate. 15 Amps/120 V/ 60 Hz. Replacement sensor can be purchased separately. The sensor comes factory calibrated for precise CO2 readings and utilizes low voltage technology to avoid radio frequency interference (RFI) from electronic ballasts.

Titan Controls® Atlas® 2 - Preset CO2 Monitor/Controller 

Preset CO2 control at 1500 PPM. Built-in self-calibration feature. Easiest to use CO2 controller on the market. Simply plug in your CO2 generator or regulator and you are ready to go. Built-in photocell allows CO2 enrichment only during daylight hours. Durable powder-coated steel enclosure. 15 Amps maximum/120 V/ 60 Hz. Patent No. D657,748.

Titan Controls® Atlas® 3 - Day/Night CO2 Monitor/Controller 

Controls and monitors CO2 from 0 to 2000 parts per million (PPM). CO2 enrichment or CO2 exhaust features. Easy to setup and operate. Enclosure resists dust, rust and moisture. 5 Amps maximum/120 V/ 60 Hz.